Human-Machine Interfaces(HMIs)-GOT GOT2000 Series
GOT Drive Control (Servo) Interactive Solutions
Support startup and maintenance of servo systems
Motion program editor function
Having problems?
An error occurred during production.
Can I edit the motion programs (G-code programs) at the shop floor?
GOT will solve your problems!
GOT can be used to edit motion programs (G-code programs). You can edit the necessary motion program by selecting it from the program list.
Function features
Motion programs (G-code programs) can be edited in the dedicated screen of the motion program editor function of the GOT.
- *Supported by GOTs with a resolution of SVGA or higher.
- *To use G-code control, the G-code add-on library (paid) must be installed.
Program List screen
GOT lists the G-code programs stored in the connected Motion CPU (MELSEC iQ-R Series).
Program Editor screen
G-code programs listed on the GOT can be edited in the line editor format.
Specification details and restrictions
●Target models*1
R64MTCPU/R32MTCPU/R16MTCPU (valid when the G-code add-on library is used)
- *1When all the following conditions are satisfied, the motion program editor is available.
• The operating system software is SW10DNC-RMTFW Ver.14 or later.
• The add-on library is Gcode_Ctrl.adm Ver.0102 or later.
• Any item other than [Not Used] is set in the G-code control setting in the basic setting.
●Supported connection types
Ethernet connection
Recommended industries
Supported GOT types
*Excluding some models. For the details, refer to the function descriptions above.